Do not use regular automotive antifreeze. The antifreeze will prevent any fluids from freezing in the exhaust system while the jet ski is stored. Mix one gallon (3.8 L) of RV antifreeze and one gallon (3.8 L) of water in a five gallon (18.9 L) bucket. Flush the mixture through the exhaust system.
Do I have to put antifreeze in my jet ski?
The reason you run antifreeze through your jet ski is to replace any water that’s in the engine, exhaust, or intercooler with antifreeze. When water freezes, it expands and can crack metal like your engine, so it’s important you flush with antifreeze.
What happens if you don’t winterize jet ski?
If You Don’t Winterize Your Boat, Here’s What Happens: Water freezes and expands and can damage anything it’s trapped inside. Water may seep into unprotected spaces to do this. Acidic and corrosive wastes, salt and corrosion buildup can damage delicate parts in engines. Fuels break down or grow dirty.
Should I put fuel stabilizer in my jet ski?
If you are storing your watercraft for an extended period of time, adding fuel stabilizer will keep the ethanol in your tank from separating and going bad. Ethanol absorbs humidity from the air, which can lead to corrosion and breakdowns.
How much is it to winterize a jet ski?
It is going to cost about $700 to have your jet ski winterized. The price will change depending on where you live and the services you are requesting. This is an average price you will pay, and of course, there will be other factors which could play into the price.
How do you de winterize a Yamaha jet ski?
- Remove the cover and the seat.
- Charge and install the battery.
- Check the engine and the liquids (oil, coolant, etc.)
- Flush the cooling/exhaust systems with fresh water.
- Inspect the features and parts.
- Lubricate the metallic and moving parts.
- Clean the jet ski if needed.
- Check the trailer carefully.
How do you winterize a WaveRunner with antifreeze?
To winterize a WaveRunner, you’ll need fuel stabilizer, RV antifreeze, and a lubricant spray. Fill up the gas tank and add the right amount of stabilizer to the fuel. Then you have to flush the cooling system with antifreeze, and lubricate the moving and metal parts.
What is winterizing a jet ski?
Tilt the jet ski up slightly and turn the handles side to side. In 20-second increments, run the engine and pull the throttle once or twice to remove excess water. When water is no longer visible, remove the air filter and spray fogging oil into the carburetor.
How cold is too cold to jet ski?
Although “too cold” means something different to everyone, general wisdom says it’s not recommended to ride a jet ski when the temperature is around or below 32°F or 0°C. Why? This is because if the temperature is around or below freezing, ice can build up in the intake of the cooling line.
How long can a jet ski sit without being used?
When it comes to 2- stroke jet ski engines, the rule of thumb is that 200 hours are considered high engine hours. Because of this, if you’re looking for a 2 stroke, try to choose a second-hand model with around 100 hours on it, but the less the better.
How often should you flush your jet ski?
Keep your WaveRunner ready to run with basic maintenance like: Changing engine oil every 50 hours. Flushing regularly. Maintaining your battery to prevent corrosion.