All metals and alloys have the potential for corrosion, especially when exposed to seawater. Preventing corrosion will extend the life of your gear and is much cheaper than repairing – or replacing – it. Chlorine from swimming pools accelerates the breakdown of materials and can fade the colour of your scuba equipment.
How do you clean scuba gear after salt water?
Unless you dive exclusively in freshwater, it’s important to rinse all neoprene items after every dive. Salt water causes neoprene to degrade and lose its flexibility. All divers should clean and disinfect their wetsuits, boots and gloves periodically with a prolonged soak in warm water and wetsuit cleaner.
What do you wash scuba gear with?
Postdive Exposure suits can be hand washed in a tub of warm water. It is best to use a wetsuit shampoo available from any retail dive facility to help prevent the suit from fading or breaking down the integrity of the rubber. Wetsuits can also be washed in a machine with a hand wash cycle.
What happens if water gets in your regulator?
The internal parts are vulnerable to damage when they’re exposed to water and moisture, so letting them get soaked will probably end up causing you to have to take your regulator to a professional to get fixed. Prior to rinsing off your regulator, replace the dust cap, securely fastening it on.
What is needed to scuba dive?
Here is a list of the basic scuba diving equipment you will need.
- Diving Mask and Snorkel. …
- Wetsuit or Drysuit. …
- Scuba Gloves. …
- Fins. …
- Scuba Tank. …
- Regulator. …
- Depth Gauge, Submersible Pressure Gauge (SPG), & Compass. …
- Dive Computer.
How do you maintain diving gear?
How To Store and Maintain Your Scuba Diving Gear
- Rinse your gear with freshwater or tap water after every dive. As mentioned above, the combination of salt, sand, and sun will corrode your scuba gear. …
- Store in dry, airy spaces away from direct sunlight. …
- Hang your wetsuits inside out. …
- Be gentle.
How do you clean old scuba gear?
Typically, a bit of dish soap and warm water is all you would need. Resist the urge to use cleaners containing chlorine (like Bleach) as they will damage the gear and potentially cause cracks, fading, and other issues. Thoroughly clean, rinse, and dry the gear before storing.
How do you dry scuba gear?
Hang your kit outside, ideally in the shade, then bring it back inside. Drying materials in a well-ventilated room is an option too, but careful not to place them next to heaters, to avoid fire hazard and damage to your equipment. Dry neoprene materials inside/out to protect the outer layer.
How do you clean scuba fins?
To clean fins, soak them in fresh water to clean off all the salt water. If you don’t clean properly, they might begin to smell and lose their flexibility. You can also spray the rubber parts down with a silicone conditioner to keep them well conditioned.
How do I clean my BCD storage?
To clean the interior, push the deflation button while aiming the water from the hose into the mechanism. Cleaning can also be accomplished by using a specifically designed BCD Flush Hose. Once the water has entered the interior, shake the BC a few times to spread it around. You can repeat this process several times.
How do you clean a scuba tank?
Many people, including some scuba store operators, feel that proper cylinder and valve O2 cleaning can be accomplished by simply filing the tank with commercial cleaning solutions and rolling the cylinder around for several minutes. The solution is then washed from the cylinder and the cylinder dried.
When should a regulator not be rinsed?
Rinsing alone, however, will not sufficiently clean the regulator. To clean the regulator as thoroughly as possible, it is necessary to soak it in warm, not over 49°C (120°F), tap water for at least one hour.
Should you accidentally exceed your dive computer’s no decompression limit?
As a recreational diver, you should never plan to exceed, or even dive right up to, the no-decompression limits), but if you accidentally find yourself past your dive time or maximum depth and running to deco, it’s good to know what to do.