How do you apply neoprene cement?
Here’s how to use this quick fix product so you can get back to paddling, surfing, or diving in no time:
- Locate all rips in your wetsuit, gloves, booties, etc. …
- Apply the Aquaseal NEO onto both sides of the tear.
- Let the cement dry for five minutes.
- Apply a second coat of the adhesive and let dry for 10 minutes.
How long does wetsuit glue take to dry?
Let the glue dry for about 1 to 3 minutes (depending on room temperature and humidity), keeping the two sides apart. The glue normally looks glossy when it is wet and will appear matte when it is dry; it should feel slightly tacky and not stick to your finger.
Can you stitch a wetsuit?
With time, stitches will lose their strength and open, but that doesn’t mean you need to buy a new wetsuit. … You’ll only need wetsuit cement, glue-on seam tape, floss, and a needle. Don’t forget that stitching punches tiny holes in the neoprene, which will cause small leaks.
What is a GBS wetsuit?
Written by. GBS seams, or glued and blind stitched seams, are a type of wetsuit seam which prevents water entering your wetsuit. GBS seams are constructed by first gluing the edges of the neoprene panels together to prevent water entering the wetsuit.
What are the best wetsuit seams?
The takeaway from this is that if you’re looking for a wetsuit for colder waters, always look for GBS seams as a minimum. If you’re in the water a lot and your suit is likely to take a battering on a regular basis, its well worth investing in taped or even sealed seams for the extra durability and waterproofing.
Can you repair a wetsuit seam?
You can use wetsuit repair glue, or neoprene glue, to glue neoprene panels together. Neoprene glue is flexible and remains waterproof. Wetsuit glue is affordable and it’s available in most surf shops or available online. Don’t use any other type of glue to repair a wetsuit cut.